background image

— 9 —

Fig. 3

CLEANING

Empty the grease drawer at least daily.  Clean the griddle regularly.  A clean griddle looks better, lasts longer, and
performs better.

To produce evenly cooked, perfectly browned griddle products, keep the griddle free of carbonized grease.
Carbonized grease on the surface hinders the transfer of heat from the griddle surface to the food.  This results in
spotty browning and loss of cooking efficiency.  Worst of all, carbonized grease tends to cling to the griddled foods,
giving them a highly unsatisfactory and unappetizing appearance.  To keep the griddle clean and operating at peak
efficiency, follow these instructions:

AFTER EACH USE:

  Clean the griddle with a flexible spatula or griddle scraper.

DURING THE DAY:

  Flush the hot griddle with water and scrape with griddle scraper to reduce the amount of

carbonized grease build-up.  Follow with a light coating of oil to prevent product sticking.

ONCE A DAY:

  Thoroughly clean backsplash, sides, and front.  Take care the integral backsplash is not 

vigorously

banged with the spatula.

Thoroughly clean and wipe out the grease trough on the griddle.  As necessary during use, wipe out accumulated
material to provide good drainage.

Remove the grease drawer, empty it, and wash it out in the same manner as any ordinary cooking utensil.

Clean the griddle surface thoroughly with water and degreasing cleaner.  Rub with the grain of the metal while the
griddle is still warm  (not hot).  Be sure the degreasing cleaner is thoroughly removed by flushing with clear water.

Clean stainless steel and chrome surfaces with a damp cloth and polish with a soft, dry cloth.

To remove discolorations, use a non-abrasive cleaner.

After each cleaning, the griddle must be reseasoned.

PILOT
TIP

PILOT
REGULATING
VALVE

ADJUSTING
SCREW

MANIFOLD

P L - 5 0 2 4 5

Содержание 902A













Отзывы: