Vuescape 62904200, Инструкция по установке и эксплуатации

Страница: 14 / 51

Graphic Display Description
Flash Off : Will not allow flash to function
Forced Flash: Flash will go off for each shot taken
Auto Flash: A sensor in the camera automatically controls whether to allow
flash by measuring the available light present.
When turning on the flash function, the camera will charge the flash automatically and
during the charging interval, the status indicator will blink. When the charging is complete
(generally 10 sec.), the status indicator will stop blinking and this will indicate you are
ready to take the picture.
Self-Timer
Press Down the direction right key while in the shoot mode preview status to turn on the
self-timer function, and the self-timer icon will appear at the top of LCD. Press again
the shutter key to start the 10 second count down which will allow you to get into the
picture. When the counter reaches 0 the camera will shoot one photo automatically.
Press the direction key’s Right key under the self-timer mode to turn off the self-timer
function, and to return back to the normal shoot mode.
Precautions:
1
When using built-in memory to save the photo, it is required to download the photo
or information backup from the camera before turning the power off and removing
the battery. Otherwise, the photo or information will be lost due to camera power off;
It is suggested to use external memory card (SD/MMC) to save the photo and
information.
2 When using the built-in memory to save a photo, only 2 photos can be taken , A
“Memory full” warning will appear after shooting 2 photos.
13