Introduction
Thank you for choosing our new generation WebCam and headphone combination. It has a high
resolution and fast transmission rate, and it is easy to transport with you for remote broadcasting.
It can be used as a Plug and Play (PnP) WebCam for real-time data transmission to PC via USB Port.
Specifications
¾
350k pixels resolution
(when used as Plug and Play)
¾
5 Megapixel resolution
(with the driver/software installed)
¾
High resolution CMOS color sensor
¾
Video mode: 24bit true color
¾
Large video capture size: 640 x 480
(when used as Plug and Play)
¾
Large video capture size: 2560 × 1920
(with the driver/software installed)
¾
Interface: USB 2.0 high-speed
¾
Transmission Rate: 640 × 480 up to 30fps
¾
Noise-signal ratio: greater than 48db (30fps 220LUX)
¾
Dynamic range: greater than 72db
¾
Image focus: 5cm to infinity
¾
Built-in image compression
¾
Automatic brightness adjustment
¾
Automatic color compensation
¾
Manual focus override
Note:
Under the Windows XP Service Pack 2 operation system, please make sure you have plugged
the camera’s USB cable into the initial USB port interface controlled by the driver software. Otherwise it
will perform as a Plug and Play USB Video Device with the lower resolution and video capture size.
System Requirement
•
Desktop PC or Laptop PC with USB 2.0 interface
•
Pentium 200 or higher CPU
•
32MB or higher RAM memory
•
Over 200MB free hard disc space
•
CD ROM drive to load driver
•
Compatible with Windows® XP Service Pack 1 (or higher), and Vista®.
Note:
The
Plug and Play feature works only with Windows® XP Service Pack 2+ and Vista®.
Package Contents
USB WebCam
Microphone Headset
Software CD
User’s Manual
