4
S
TAGE
4
–
S
TART
-
UP OF THE
A
IR
H
ANDLING
U
NIT
Details in chapters:
REFERENCE MANUALS
In the following chapters of this Quick Set-Up Manual, multiple references to detailed manuals of VVSc and VVSs ranges
will occur. The full list of the reference manual has been listed below with the links:
Installation, Operation and Maintenance Manual VENTUS COMPACT VVS021c-VVS150c [EN]
– a full, detailed Operation
and Maintenance Manual for VVSc Floor-mounted Compact Air Handling Units. This manual covers all information related
with installation, set-up and start-up of the VVSc units.
Installation, Operation and Maintenance Manual VENTUS Supended VVS005s-VVS030s [EN]
– a full, detailed Operation
and Maintenance Manual for VVSs Ceiling Suspended Compace Air Handling Units. This manual covers all information
related with installation, set-up and start-up of the VVSs units.
VENTUS_Compact_connecting_instruction.pdf
– Graphical Manual describing how to connect all of your peripheral control
components to the main unit’s switchboard – an release for fast printing.
Installation, Operation and Maintenance Manual - VENTUS Software - uPC3 controller and BMS data [EN]
– detailed
information all advanced functions of the uPC controller applied in your Air Handling Units
User Manual - Visualization guide for uPC3 controller [EN]
– document covering remote AHU operations visualization by
means of web-browser or mobile devices.
MINIMUM REQUIRED TOOLS RANGE
Before attempting to any electric connections described in detail in the following chapters of this manual, ensure that you
are equipped with the following
minimum range of tools
:
Table 1 - minimum necessary tools
Tool name
Tool application
Picture
Set of flat head screwdrivers
Plugging the control elements terminals
into the switchboard
Set of cross screwdrivers
Connecting of the power supply to
relevant parts of the Air Handling Units
Battery drill & set of various bits
Opening and closing of AHU sections
and switchboard
LOCATION OF THE KEY ELEMENTS ON THE UNIT
VVS
C
F
LOOR
-
MOUNTED
C
OMPACT
U
NITS
The VVSc Floor-mounted AHU may be factory-fitted for indoor or outdoor application (depending on the order).
Depending on the execution, location of the terminal-box may vary, as per below:
VVSc AHU fitted for indoor installation
– terminal box installed on the base unit’s ceiling.
VVSc AHU fitted for outdoor installation
– terminal box installed on the base unit’s rear wall.
Location of the terminal boxes for VVSc units has been demonstrated on Figure 2.
