( Instructions continued on next page )
Page 1
Instruction sheet --
VTI
Flat panel TV cart
Model number: FPCAB4226E
Congratulations for having chosen this excellent
VTI
product.
To assure your complete satisfaction, this product is warranted against defect in
manufacture for one years after the purchase date. Any parts requiring replacement
during the 1--year period, under normal use and service, as a result of defective
workmanship, will be replaced by
VTI
or by an authorized
VTI
dealer, without cost,
except for transportation charges. All unit should be returnd in original packing, to
guarantee safe transport.
VTI
is not responsible for damage in shipment. If you have
any questions regarding the assembly of your table, please call the
VTI
helpline at
(626)575-1860.
Note: This unit is easier to assemble with two people.
Parts list
Qty. Description
1
Top shelf section
1
Bottom shelf section
2
Poles for supporting flat panel TV
2
Horizontal mount
1
Electrical bracket
1
Power cord
3
Screws and hex nuts(E)
1
Cart handle (Optional)
Qty. Description
9 Set Phillips head bolt, washer and hex nut(I)
2
Casters with brakes
2
Casters without brakes
2
Hex head screws for mounting the poles(F)
1
Hex head screw (G)
1
Hex head screw (H)
1 Set Side extended pull out shelf
Tools required
Hex wrench (provided)
Allen key (provided)
Adjustable wrench/pliers
Rubber mallet
FPCAB4226E
3.
Insert two bolts, washer and nuts(see screw table I) into each leg
of table. Washer should be on the inside of leg. Tighten all bolts
and nuts.
4.
Lay unit on floor . Insert casters with brakes into opposite
corner holes in the bottom of the unit. Insert other casters into
remaining holes of unit.
M a n u f a c t u r i n g , I n c .
V T I
Horizontal mount
Pole
Screw table
Some screws may have already been
screwed on the related parts.
1.
Insert top table section onto bottom section.
2.
Align corresponding holes of unit to obtain desired height of
table as needed..
