Page 2
1.
Lay unit on floor . Align
the holes on the casters
with the holes on the
corner of the bottom
shelf. Use the hex screws
(see screw table F) and
tighten the caster. Repeat
the same for the other three
casters. It is recommended
you place the locking casters
on either the right side or left
side of the unit for safer and
easier movement of cart
through doorways, ect..
4.
Insert the two horizontal
mounts onto the
supporting poles. Note:
The mount with adjustable
screw(see screw table H)
should go on the bottom.
Screw(see screw table G)
the top mount to desired
height from A to F. Adjust
the bottom mount height
according to the TV screw
position later.
Top horizontal mo
unt
Bottom horizontal mo
unt
2.
Hand-tighten the upper
pole (with holes) to the
lower poles.
Upper pole
Lower pole
3.
Insert the two TV supporting
poles onto the holes on
top shelf.
Back view
