VTech VT9013, Руководство пользователя

Страница: 20 / 25

8.2.2 Set the handset priority
When you have more than one handset registered to the base station, you can set which
handset to ring first before the others.
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
H/Set Priority .
3. Press <OK> and <UP/DOWN> to choose Select Handset.
4. Press <OK> and <LEFT/RIGHT> to select which handset to get the priority to ring first.
Note: If All Handsets is chosen, all the registered handsets will ring at the same time and press
<OK> to confirm.
5. Press <OK> and <LEFT/RIGHT> to select the number of ring delay (2 Rings / 4 Rings /
6. Press <OK> to confirm.
8.2.3 Set the dial mode
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
Dial Mode .
3. Press <OK> and <LEFT/RIGHT> to select Tone or Pulse
.
4. Press <OK> to confirm.
8.2.4 Set the flash time
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
Flash Time .
3. Press <OK> and <UP/DOWN> to select the desired flash time.
Note:Flash time options are country dependent. Possible options are
80/100/120/180/250/300/600/800ms. Defaulted Flash time is 600ms.
4. Press <OK> to confirm.
8.2.5 Change the system PIN
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
System PIN .
3. Press <OK> to enter the old 4-digit system PIN.
4. Press <OK> to enter the new 4-digit system PIN.
5. Press <OK> to enter the new 4-digit system PIN.
6. Press <OK> to reconfirm and save the new 4-digit PIN.
Note: If the PIN is incorrect, “INCORRECT PIN” will display with an error tone in the screen.
8.2.6 Set an exchange code
You can set an exchange code for your handset such that a pause will be inserted after the first
digit if it matches with the exchange code. This feature is especially useful for PBX systems.
In Idle:
1. Repeat steps 1 and 2 in section 8.2.1.
2. Press <OK> and <UP/DOWN> to select
3. Press <OK> to enter the exchange code.
4. Press <OK> to confirm.
Note: Only one digit is allowed to enter for the exchange code.
6 Rings / 8 Rings).
PBX access .
5. Press < DOWN> and <LEFT/RIGHT> to select your desired ringer volume from Level 1 to
Level 5 or Off .
6. Press <OK> to confirm.