35
8.4.4
Change the Flash Time
The flash time setting is country dependent. Please contact your local telephone service provider for the correct settings.
1. Press
and
U
/
D
to select BS SETTINGS.
2. Press
OK
and
U
/
D
to select FLASH TIME.
3. Press
OK
and
U
/
D
to select your desired flash time (SHORT, MEDIUM, LONG).
4. Press
OK
to confirm.
8.4.5
Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorized
use. The default system PIN code is 0000.
1. Press
and
U
/
D
to select
BS SETTINGS
.
2. Press
OK
and
U
/
D
to select
CHANGE PIN
.
3. Press
OK
and you are requested to enter the 4-digit system PIN.
4. Enter the old system PIN.
5. Press
OK
and enter the new system PIN.
6. Press
OK
and enter the new system PIN again.
Note:
If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is requested to enter the valid system PIN
again in Step 5.
7. Press
OK
to confirm.
8.4.6
Call Share
When Call Share is set to ON, handset and base can establish conference call by pressing
T
/
S
on the handset or
s
on the base during
conversation.
1. Press
and
U
/
D
to select BS SETTINGS.
2. Press
OK
and
U
/
D
to select CALL SHARE.
3. Press
OK
and
U
/
D
to select ON or OFF.
4. Press
OK
to confirm.