VTech VT1923, Руководство пользователя

Страница: 14 / 31

14
BASIC OPERATION
AREA CODE PROGRAMMING
To benefit from all the Caller ID
features of your telephone, you must
enter your home area code.
If you live in an area where you dial
calls within your own area code by
dialing 7 digits (no area code), follow
these steps (with the Handset OFF ):
•
Press PGM .
• Press until AREA is blinking.
• Press OK/SELECT .
• HOME should be blinking. If not,
press until it blinks.
• Press OK/SELECT . ENTER
AREA CODE is displayed.
• Enter 000.
• Press OK/SELECT and continue
below.
You may program up to 5 local area
codes. An area code is “local” if you
do not dial “1” when you make calls to
that area code. In other words, you
make calls to “local” area codes by
dialing 10 digits (area code plus phone
number) without a preceding “1”. This
might include your own area code
•
Press PGM .
• Press until AREA
is blinking.
• Press OK/SELECT .
• Press until LOCAL is blinking.
• Press OK/SELECT .
• HOME should be blinking. If not,
press until it blinks.
• Press OK/SELECT . You will see
:
• Enter your own home area code.
• Press OK/SELECT .
LESS COMMON ALTERNATIVE
If you live in an area where all local calls
require 10 digits (area code plus phone
number, without dialing “1” first:)
•
Press PGM .
• Press until AREA is blinking.
• Press OK/SELECT . ENTER
AREA CODE isdisplayed.
• Enter a “local” area code.
• Press OK/SELECT .
Press OK/SELECT .
• Press until the desired location
is blinking (#1…..#5).