30
If you have difficulty operating your phone, the suggestions below should solve the
problem. If you still have difficulty after trying these suggestions, call VTech
Communications at 1-800-595-9511. In Canada, call VTech Telecommunications
at 1-800-267-7377.
The Phone Doesn't Work At All
Make sure the Power Cord is plugged in.
Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone
wall jack.
Make sure the batteries are properly charged. If the '
LOW BATTERY
' LED is slowly
flashing, the battery pack needs charging.
No Dial Tone
First check all the suggestions above.
If you still don't hear a dial tone, disconnect the Base Unit from the telephone jack
and connect a different phone. If there is no dial tone on that phone either, the
problem is in your wiring or local service. Contact your local telephone company.
You Get Noise, Static, Or A Weak Signal Even When You're Near The Base
Unit
Household appliances plugged into the same circuit as the Base Unit can sometimes
cause interference. Try moving the appliance or the Base Unit to another outlet.
You Get Noise, Static, Or A Weak Signal When You're Away From The Base
Unit
You may be out of range. Either move closer to the Base, or relocate the Base
Unit.
The layout of your home may be limiting the range. Try moving the Base Unit to another
position.
The Handset Does Not Ring When You Receive A Call
Make sure you have the Handset ringer activated. To set the ringer, see
Programming the Ringer Type
.
Make sure the telephone line cord is plugged firmly into the Base Unit and the telephone
jack. Make sure the power cord is plugged in.
You may be too far from the Base Unit.
You may have too many extension phones on your telephone line to allow all of
them to ring. Try unplugging some of the other phones.
You Hear Other Calls While Using Your Phone
Disconnect your Base Unit from the telephone jack, and plug in a regular telephone.
In Case Of Difficulty
Additional Infor
mation
