37
BASE UNIT MESSAGE WINDOW
(LED)
REMOTE OPERATION OF THE VT 1970ci
•
The large Base Unit display provides useful data on the status of your
VT
1970ci answering device. Below are examples of the data:
The Base displays:
What it means:
Flashing number
You have that amount of new messages
0
You have no new messages
CL flashing
The clock needs to be set
A
Answering device is in announce-only mode
F flashing
Memory is full
99 flashing
Recording time has exceeded 99 seconds
1-7
Volume level, as you're setting it.
--
Answering device is answering a call or in
remote mode
-- flashing
Answering device is in programming mode
•
From a remote location, you can
access many of theVT1970ci
answering device functions, such
as listening to messages, recording
a memo, or changing your outgoing
message.
•
To access your VT1970ci remotely,
you need to call from a different
phone line, using a touch-tone
phone.
•
Dial your phone number and wait
for the VT1970ci
to answer.
•
While the VT1970ci is playing the
outgoing message, press # ,
then enter your 2-digit security
code.
•
(If the VT1970ci is OFF when you
call, let the phone ring at least 10
times. The answering device will
turn itself ON, and prompt you to
enter your security code.)
•
The factory-set security code is 19.
To program a different code, see
SETTING UP YOUR VT1970ci
ANSWERING DEVICE - SET
SECURITY CODE.
•
Once the security has been
entered, you will hear a beep,
confirming that the VT1970ci has
entered remote operation.
•
You will then hear the voice prompt
announce the number of new
(unplayed) messages, followed by
the playback of the new messages
(if any).
vt1970ci/hjmannual
1/29/99, 12:52 PM
37
