VTech VT 1721, Руководство пользователя

Страница: 14 / 41

14
USING THE WALL MOUNT
ADAPTOR
1. Position the wall mount bracket
on the Base Unit.
Line up the tabs on the wall
mount adaptor with the holes on
the bottom of the Base Unit .
Snap the wall mount bracket firmly
in place.
2. Mount the Base Unit on the wall.
Position the Base Unit so the
mounting studs will fit into the
holes on the bottom of the Base
Unit. Position the power cord to
extend down the wall the phone
is to be mounted on. Slide the
Base Unit down on the mounting
studs until it locks into place.
3. Plug in the AC adaptor.
Plug the AC adaptor into an
electrical outlet, and the DC
connector to the back of the Base
Unit. If the Handset battery pack
has not been charged
previously,
place
the Handset
face down in the Base Unit
cradle, and allow it to
charge
for
16 hours.
WALL MOUNTING
4. Connect the telephone line cord.
The telephone line cord has a
snap-in plug at each end. Insert
one of the plugs into the jack on
the bottom of the Base Unit.
Insert the other end of the plug
into the wall jack.
5. Plug the AC adaptor into an
electrical outlet and DC
connector to the back of the
Base Unit.