17
Adding a corded headset
You can use this deskset hands-free when you install any industry-standard 2.5 mm
corded telephone headset (purchased separately).
Registering the deskset to the base
The deskset must be registered to the base station in order to make and receive calls.
To register the deskset:
1. Make sure both the deskset and the base station is connected to power.
2. On the base station, press the
HANDSET LOCATOR
button for at least four
seconds, then release the button. Both LEDs on the
base station begin to flash slowly.
3. Press the
#
key on the deskset to begin registration. The
process takes up to 10 seconds to complete.
When the first deskset registers, it beeps and the screen
displays
HANDSET
n
(the number
n
depends on how many devices are already
registered to the base).The deskset is ready to use.
If the deskset fails to register, it displays
Registration failed. Try again
. Wait for a
few seconds and repeat the registration procedure.
Deregistering the deskset
Before using the deskset with a different base station, you must deregister the
deskset from the base station to which it is currently registered.
To deregister the deskset:
1. Press
MENU
on the deskset. The Main Menu appears.
2. Press
q
to scroll to
User settings
and then press
SELECT
.
3. Press
q
to scroll to
Registration
and then press
SELECT
.
4. Press
q
to highlight
Deregistration
and then press
SELECT
.
The deskset screen displays a list of devices registered to the base.
Plug a 2.5 mm headset into
the
HEADSET
jack on the side
of the deskset.
