VTech VH6220 Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 54

VTech VH6220 Скачать руководство пользователя страница 48

41

Appendix

California Energy Commission battery charging testing
instructions

This wireless headset is set up to comply with the energy-conserving standards right out of
the box. These instructions are intended for California Energy Commission (CEC) compliance
testing only. When the CEC battery charging testing mode is activated, all headset functions,
except battery charging, will be disabled.

If you have registered the wireless headset to the

VH6220/VH6221

headset base, below are

the testing instructions.

To activate the CEC battery charging testing mode:

1. Unplug the headset base power adapter from the power outlet. Make sure the headset is

plugged with the charged battery before proceeding.

2. Press and hold

PAIR

on the headset base while powering up the base by plugging in the

adapter.

3. After about 20 seconds, when the blue

PHONE

light on the headset base starts flashing,

release

PAIR

and then press it again within two seconds.

The process takes up to one minute to complete. When the headset successfully enters the
CEC battery charging testing mode, the

LED light flashes slowly in red and blue.

NOTE:

When the headset fails to enter this mode, repeat all the steps mentioned above.

To deactivate the CEC battery charging testing mode:

1. Unplug the headset base power adapter from the power outlet, then plug it back in. The

headset base is powered up as normal.

2. Register the headset back to the headset base.

If you have registered the wireless headset to a compatible VTech DECT cordless telephone,
please refer to the respective user's manual for the activation and deactivation of CEC battery
charging testing mode.

If you have registered the wireless headset to a telephone base that does not have CEC
battery charging testing mode, all telephone functions on the wireless headset, except
battery charging, will be disabled.

«
...
46
47
48
49
50
...
»

Содержание VH6220























































Отзывы:

Нет отзывов