Configuration Using the Phone Menus
21
Back to Contents
VCS754 Administrator and Provisioning Manual
To enable or disable DHCP:
1.
From the
Network setting
menu, press
or
to highlight
DHCP
, and then press
SELECT
.
The
DHCP
screen appears.
2.
Press
or
to select
Enabled
or
Disabled
, and then press
.
DHCP is enabled by default, which means the VCS754 will get its IP address from the
network. When DHCP is disabled, you must enter a static IP address for the VCS754.
To set static IP for the VCS754:
1.
From the
Network setting
menu, press
or
to highlight
Set static IP
, and then
press
SELECT
.
If DHCP is disabled, the
Set static IP
menu appears. If DHCP is enabled, an error
message appears briefly before returning you to the
Network setting
menu.
2.
On the
Set static IP
menu, enter the static IP address. Use the dial pad and the
soft key to enter characters. Press
or
to advance to the next character.
3.
Press
and enter the Subnet Mask. Use the dial pad and the
soft key to
enter characters. Press
or
to advance to the next character.
4.
Press
and enter the Gateway. Use the dial pad and the
Add dot
soft key to enter
characters. Press
or
to advance to the next character.
5.
Press .
Save
You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
Add dot
Add dot
