30
Before use
After you install your telephone, or power returns following a power outage, the
telephone system will prompt you to set the date and time first. Then, it will ask you
to set the answering system through voice guide.
Set date and time
NOTES
Make sure you set the date and time including the year correctly; otherwise the answering
system does not announce the correct day of the week for your recorded messages time
stamp.
Use the dialing keys (
0
-
9
) to enter the month, date, and year, and then press
NEXT
.
Use the dialing keys (
0
-
9
) to enter the hour and minute.
Press or
on the handset, or
CALLER ID /
or
PHONEBOOK /
on the telephone base to scroll to choose
AM
or
PM
, and then press
SAVE
to
save.
After the setting for the date and time, the screen will display
Start voice guide to
set up Answering system now?
.
Set answering system through voice guide
This feature assists you to do the basic setup of the answering system. You can
follow the voice guide to record your own announcement, set the number of rings
and the message alert tone.
Press
YES
to start the voice guide for the answering system setup. You hear the
voice prompt “
Hello! This voice guide will assist you with the basic setup of your
answering system.
”
Setup your answering system by inputting the designated numbers as instructed
in the voice guide.
Check for dial tone
Press or on the handset, or on the telephone base. If you hear a dial tone,
the installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures described above are properly done.
It may be a wiring problem. If you have changed your telephone service to digital
service from a cable company or a VoIP service provider, the telephone line may
need to be rewired to allow all existing telephone jacks to work. Contact your
cable/VoIP service provider for more information.
•
1.
2.
3.
1.
2.
•
•
