background image

In Case Of Difficulty

If you have difficulty operating your phone, the suggestions below should solve the problem.
If you still have difficulty  after  trying  these  suggestions, call   VTECH   Communications
at  1-800-595-9511. In Canada, call VTECH Telecommunications Canada Ltd at 1-800-
267-7377.

The Phone Doesn't Work At All

Make sure the Power Cord is plugged

Make sure the telephone line cord is plugged firmly into the Base Unit and the
telephone wall jack.

Make sure the batteries are properly charged.  If the 'LOW BATTERY' message
is shown, the battery pack needs charging.

Is the Handset registered to the Base? See Registration.

No Dial Tone

First check all the suggestions above.

If you still don't hear a dial tone, disconnect the Base Unit from the telephone jack
and connect a different phone.  If there is no dial tone on that phone either, the
problem is in your wiring or local service. Call your local telephone company.

You Get Noise, Static, Or A Weak Signal Even When You're
Near The Base Unit

Household appliances plugged into the same circuit as the Base Unit can sometimes
cause interference.  Try moving the appliance or the Base Unit to another outlet.

You Get Noise, Static, Or A Weak Signal When You're Away
From The Base Unit

You may be out of range. Either move closer to the Base, or relocate the Base
Unit.

The layout of your home may be limiting the range. Try moving the Base Unit to
another position.

The Handset Does Not Ring When You Receive A Call

Make sure you have the Handset ringer activated.  To set the ringer, see HANDSET
SETTINGS and BASE SETTINGS in the v 2651 or v 2656 User’s Manual.

Make sure the telephone line cord is plugged firmly into the Base Unit and the
telephone jack.  Make sure the power cord is plugged in.

You may be too far from the Base Unit.

10

11

Taking Care Of Your Telephone

Your cordless telephone contains sophisticated electronic parts, so it must be treated
with care.

Avoid rough treatment

Place the Handset down gently. Save the original packing materials to protect your
telephone if you ever need to ship it.

Avoid water

Your telephone can be damaged if it gets wet. Do not use the Handset outdoors in the
rain, or handle it with wet hands. Do not install your Base Unit near a sink, bathtub or
shower.

Electrical storms

Electrical storms can sometimes cause power surges harmful to electronic equipment.

For your own safety, use caution when using electric appliances during storms.

Cleaning your telephone

Your telephone has a durable plastic casing that should retain its luster for many years.
Clean it only with a soft cloth slightly dampened with water or a mild soap. Do not
use excess water or cleaning solvents of any kind.

Remember that electrical appliances can cause serious injury if used when you are
wet or standing in water.  If your Base Unit should fall into water, DO NOT RETRIEVE
IT UNTIL YOU UNPLUG THE POWER CORD AND TELEPHONE LINE CORDS FROM
THE WALL
. Then pull the unit out by the unplugged cords.

Maintenance

Periodic cleaning of the charge contacts

For optimum performance, regularly clean the metal charge contacts located
in the Base Unit charge cradle and on the bottom of the Handset.  Gently rub
the contacts with a clean pencil eraser.  In most environments, monthly contact
maintenance is sufficient.

Содержание v 2600












Отзывы: