VTech Touch & Chat Light-Up Phone, Руководство для родителей, Страница: 4 / 13

4 4
4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off .
2. Find the battery cover located on the
back of the unit, use a screwdriver to
loosen the screw, and then open the
battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery box. For best performance,
alkaline batteries or fully charged Ni-MH rechargeable batteries are
recommended.
5. Replace the battery cover and tighten the screw to secure.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
WARNING / ATTENTION:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.