4
Removing the packaging locks
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy and should be discarded for your child’s safety.
NOTE:
Please keep the Parent’s Guide as it contains important
information.
Turn the packaging lock anticlockwise several
times.
Pull out the packaging lock and discard.
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the
bottom of the slide base. Then, use
a coin or a screwdriver to loosen the
screw and remove the cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance).
5. Replace the battery cover and tighten the screw to secure.