5
Getting S
tarted
Table/Desk Installation
Installation
4. Charge the Handset Battery
Place the Handset in its Base. Charge the battery at least for 12 hours before using your
telephone for the first time.
5. Check for Dial Tone
After the battery is charged, pick up the Handset and press PHONE. You should hear
a dial tone.
6. Set the Dial Mode
If you have touch tone service, the phone is ready to use as soon as the batteries are
charged. If you have pulse (rotary) service, you’ll need to change the dial mode.
•
Press PROG on the Handset.
•
Press or until the screen displays DIAL MODE:
and the current selection.
•
Press SEL. The current setting blinks.
•
Press to select TONE or PULSE.
•
Press SEL to save the displayed mode.
7. Set Date and Time
If you subscribe to Caller ID service, the date and time will be set automatically with the
first incoming call. If you do not have Caller ID service, you can set the date and time
manually:
•
Press PROG on the Handset.
•
Press or until DATE/TIME is displayed. Press SEL.
•
The month is flashing. Press or until the screen displays the correct month.
Press SEL.
•
The day is flashing. Press
or
until the screen displays the correct day.
Press SEL.
•
The hour is flashing. Press or
until the screen displays the correct hour.
Press SEL.
•
The minute is flashing. Press or until the screen displays the correct minute.
Press SEL.
•
AM or PM
is flashing. Press
or
to choose between AM or PM.
Press SEL.
VTECH TELECOMMUNICATIONS LTD.
DC 6V 300mA
CLASS 2 POWER SOURCE ONLY
CORDLESS TELEPHONE
VTech Customer Service 1-800-595-9511
www.vtechphones.com
6V DC
Connect the
Power Cord
Standard electrical
outlet
C o n n e c t t h e
P o w e r C o r d
Connect the
T e l e p h o n e
Line Cord
Standard electrical outlet
Modular telephone jack
91-5704-10-00 manual.pmd
4/29/2004, 6:14 PM
5
