VTech t 2435 Скачать руководство пользователя

Страница: 1 / 33

Important Safety Instructions

When using your telephone equipment, basic safety precautions should always

be followed to reduce the risk of fire, electric shock and injury, including the

following:

1. Read and understand all instructions.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid

or aerosol cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for example, near a bath tub, kitchen

sink or swimming pool).

5. Do not place this product on an unstable surface, such as a table, shelf, or

stand. The product may fall, causing serious damage.

6. Slots and openings in the back or bottom of the Base Unit and Handset are

provided for ventilation. To protect them from overheating, these openings

must not be blocked by placing the product on a soft surface such as a bed,

sofa or rug. This product should never be placed near or over a radiator or

heat register. This product should not be placed in any area where proper

ventilation is not provided.

7. This product should be operated only from the type of power source indicated

on the marking label. If you are not sure of the type of power supply in your

home, consult your dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not install this product

where the cord may have anyone walking on it.

9. Never push objects of any kind into this product through slots in the Base or

Handset as they may touch dangerous voltage points or short out parts that

could result in a risk of fire or electric shock. Never spill liquid of any kind on

the product.

10. To reduce the risk of electric shock, do not disassemble this product, but

take it to an authorized service facility. Opening or removing parts of the

Base or Handset other than specified access doors may expose you to

dangerous voltages or other risks. Incorrect reassembling can cause

electric shock when the product is subsequently used.

11. Do not overload wall outlets and extension cords as this can result in the

risk of fire or electric shock.

12. Unplug this product from the wall outlet and refer servicing to an authorized

service facility under the following conditions:
A. When the power supply cord or plug is damaged or frayed.

91-5704-10-00 manual.pmd

4/29/2004, 6:14 PM

Содержание t 2435


































Результаты поиска

Содержание t 2435

Отзывы:

Похожие инструкции для t 2435

Бренды по названию

Популярные бренды

VTech t 2435, Руководство пользователя

Результаты поиска

Содержание t 2435

Отзывы:

Похожие инструкции для t 2435

Бренды по названию

Популярные бренды