4
4
INSTRUCTIONS
Battery Removal and Installation
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the back
of the unit. Use a screwdriver to loosen
the screw.
3. If used batteries are present, remove
these batteries from the unit by pulling up on one end of each
battery.
4. Install 2 new ‘AAA’ (AM-4/LR03) batteries following the
diagram inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach
of
children.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
