VTech Snap & Surprise Camera, Руководство пользователя

Страница: 9 / 10

9
2.
Interrupt the power supply by removing the batteries
.
3. Let the unit stand for a few minutes, then replace the batteries .
4. Turn the unit
ON
. The unit should now be ready to play again .
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the US. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call
VTech
®
1-800-
521-2010 in the US. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing
Infant Learning
products is accompanied
by a responsibility that we at
VTech
®
take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department on
at 1-800-521-2010 in the US. or 1-877-352-8697 in Canada, with
any problems and or suggestions that you might have. A service
representative will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
Other Info