4
MEMORY INITIALIZATION
If you want to initialize all the memory content in the unit:
1. Turn the unit OFF.
2. Hold “ALT” and “R” keys at the same time and .
3. Press ON to turn ON the unit.
4. Follow the prompts on the screen.
Warning: If you confirm to initialize the memory, all stored records, will be erased.
AC ADAPTOR CONNECTION
Use a 14.5V 4.5VA (Ideal to be used with DC 9V 500mA) center-positive
adaptor.
1. Make sure the unit is OFF.
2. Locate the adaptor jack on the back of the unit.
3. Plug the adaptor into the unit’s adaptor jack.
4. Plug the adaptor into a wall outlet.
NOTE: Do not leave the adaptor plugged in for long periods of time if the unit
is not in use.
ON/OFF BUTTONS
Turn ON your VTECH
®
Power Zone™ Edge learning aid by
pressing the ON button on the front panel. The unit will show
an opening animation and you can select a category or an activity.
Turn the unit OFF by pressing the OFF button on the front panel.
AUTOMATIC SHUT-OFF
If there is no input into the VTECH
®
Power Zone™ Edge learning product
for several minutes, the unit will automatically shut off to save power. After
the automatic shut-off is activated, you need to press the ON button again.
We recommend that you turn the unit OFF when not playing with it. If the
VTECH
®
Power Zone™ Edge learning product is not going to be used for
a long period, remove the batteries and unplug the adaptor.
VOLUME SWITCH
Adjust the volume by sliding the Volume Switch up to raise the
volume and down to lower the volume.
CONTRAST SWITCH
Adjust the image on the screen by sliding the Contrast Switch
up for higher contrast and down for lower contrast.
34600 I/M
2/28/00, 11:27 AM
4
Содержание Power Zone Edge
Страница 1: ......