5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned
OFF
.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw.
3. Install 2 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
With the
Pop-a-Balls™ Pop & Surprise Ball Center™
, safety
comes first. To ensure your child’s safety, adult assembly is
required. Please carefully follow the assembly instructions below
and make sure the final assembly is correct. Adult supervision
is recommended.
