4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to open the cover.
4. Install 2 new AAA (LR03/AM-4) batteries
following the diagram inside the battery box. (The
use of new, alkaline batteries is recommended for
maximum performance.)
5. Replace the battery cover and tighten the screw
to secure.
Note: If there is no response when the unit is switched on, please insert new
batteries and try switching it on again.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries
.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
