4.10 Find the Handset (PAGING)
Paging is a useful way for finding lost handset(s).
Press the paging key on the bottom of the base station. All the registered
and available handsets will produce the paging tone and “<<
PAGING>>
” is
displayed on the LCD.
Press
/
/
on any handset or the paging key on the bottom of the
base station again to stop paging.
NOTE
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.11 Make an Internal Call
This feature is only applicable when there are at least two registered handsets.
It allows you to make internal calls, transfer external calls from one handset to
another handset and make conference calls. If the called handset is not answered
within 60 seconds, the called handset will stop ringing and the calling handset will
return to standby mode.
4.11.1 Call Another Handset
In idle mode, press
. The screen displays all registered handsets except the
calling handset.
Enter the desired handset number to intercom with.
The called handset rings and press
on the called handset to establish the
internal call.
NOTES
If only one handset is registered to the base station, press
and it will display
“
NOT POSSIBLE
”.
If only two handsets are registered to the base station, press
will connect to
another handset immediately.
4.11.2 Call All Handsets
In idle mode, press
and the screen displays all registered handsets.
Press
9
to ring to all registered handsets.
1.
2.
1.
2.
3.
•
•
1.
2.
