VTech Little SmartTop, Руководство для родителей, Страница: 12 / 15

11
SOFTWARE INSTALLATION
Before you can connect the
Little SmartTop
to your computer,
you need to install the VTech
®
Learning Lodge
™ software on your
computer. To obtain the VTech
®
Learning Lodge
™, please go to the
VTech
®
Little SmartTop
download site on http://www.vtechuk.com/
download and download the setup file.
Once the setup process is complete, connect the VTech
®
Little
SmartTop to the computer using a USB cable. Locate the USB
port on the left side of your product, and plug the device into your
computer’s USB port.
Note:
1. If the power supply is interrupted during the transfer of data to the
VTech
®
Little SmartTop , the data on the VTech
®
Little SmartTop
may be lost. Before connection, please check and make sure that
your batteries are not running low on power.
2. Refrain from unplugging the USB cable during the transfer of data
to the VTech
®
Little SmartTop . This may cause the data to transfer
abnormally or be lost.
3. If having problems with downloading any content, please reset the
unit by pressing the ON/OFF button while holding the f & r buttons.
NOTE: This will delete all your downloads and require you to create a
new user ID when connecting to the VTech
®
Learning Lodge
™.
If the VTech
®
Little SmartTop is connected
properly, you will see this picture shown on the
screen of your VTech
®
Little SmartTop . You
will be taken directly to the
VTech
®
Learning
Lodge
™ website, where you can enjoy all of the online features.