VTech KidiGo NexTag, Инструкция по эксплуатации, Страница: 6 / 19

6 6
6
diagram inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable
batteries are recommended.)
5. Replace the battery cover and tighten the screw
to secure.
Attention: The red KidiGo ™ NexTag ™ Unit
is in Try Me mode. To exit this mode, follow the
steps below:
1. Press and hold the
Power Button
to turn off the unit.
2. Press and hold the Power Button for more than one second to turn
on the unit and activate normal play mode.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy before
charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.