3
Cordless 2-line telephone base - HSH803
T elephone base installaion
The telephone base is designed for desktop use. Install the telephone base as shown below.
Power cord
Control panel
Charging base
L1 + L2
DC OUT
REG
POWE
R
UART
Line and power
from wall
Plug one end of a RJ45 line cord
to
L1+L2 jack and plug the other
end of a RJ45 line cord to line
and power.
Plug one end of a RJ45 line
cord to the power jack of the
charging base.
Plug the other end of a RJ45 line
cord to
DC OUT jack.
Cordless 2-line telephone base
Plug on end of the RJ14 cord
to
UART jack and the plug the
other end to the control panel.
Note: The telephone base can support one charging base. It is optional for you to connect the charging base to the telephone base.
Refer to
Charging base installation on page 2 for another installation method for charging base.
