36
Appendix
Expand your telephone system
The handsets provided with your telephone system are already registered.
Each handset is assigned a number that shows on the handset display.
Additional handsets registered to the telephone system are assigned
in sequential order. For instance, if the telephone system already has
HANDSET 1
and
HANDSET 2
, the new registered handset is assigned
HANDSET 3
. This telephone system accommodates up to 12 handsets.
Add and register a handset (optional)
You can add new handsets (
LS6205
, purchased separately) to your
telephone system, but each handset must be registered with the telephone
base before use. When first purchased, each expansion handset shows
NOT REGISTERED
. You may need to charge the handset before
registering to the telephone base. For more details on battery charging, see
the table on page 3.
To register a handset:
Place the unregistered handset in the telephone base or charger. If
PRESS FIND HS 4 SEC ON BASE
does not appear on the handset
screen after a few seconds, remove the handset and place it in the
telephone base or charger again.
On the telephone base, press and hold
/FIND HANDSET
for about
four seconds and then release the button. The handset shows
PLEASE
WAIT...
and it takes up to 60 seconds to complete the registration. The
handset shows
HANDSET X REGISTERED
(
X
represents the handset
number assigned) and you hear a beep when the registration completes.
Make sure you press and hold the
center
of
/FIND HANDSET
in this
step. If you do not, the telephone base may not detect the key press. If you
have difficulty, repeat this step.
1.
2.
3.
If the registration fails, the handset shows
NOT REGISTERED
. To reset
the handset, remove the handset from the telephone base and place it back
in. Try the registration process again.
You cannot register a handset if any other system handset is in use.
•
•
