Configuration File Parameter Guide
335
ET685 Administrator and Provisioning Manual
Description:
This value specifies after how many seconds the phone should attempt to
reregister when the initial registration has failed. If this value is zero, the
phone will make no such attempt.
Value can be single integer value (range '1' to this value) or a range like
'2,10'. Randomizing 10 percent if single value is configured (e.g. 300 +-
30sec)
The value can also be, for example '3,6:300'. In this case when the phone
loses the registration, a random value in seconds between 3 and 6 will be
chosen and after this time the phone will try again. After that the value is
doubled and the phone will try again until registration succeeds or the timer
rechaed the second value. This is the maximum timer value. So basically
the longer the phone is unregistered the longer it takes to reregister.
Values:
1 - 1209600
Default:
300
Setting:
retry_after_failed_subscribe
Description:
When subscription fails this settings describes the value in seconds after
which the phone will try again.
Be aware: don't confuse this setting with the SUBSCRIBE expiration,
which is defined by setting user_subscription_expiry
Values:
Positive Integer
Default:
600
Setting:
ring_after_delay
Description:
The phone delays playing the ringer for the given amount of seconds. But
the message LED still rings from the beginning.
Values:
Integer, blank
Default:
blank
Setting:
ring_count
Description:
This setting is used for synchronisation of Call Forwarding
Timeout/NoAnswer for Broadsoft.
Values:
Integer
Default:
5