This feature is available if you have subscribed the Caller Line
Identification service with your telephone service provider. Your
phone can store up to 20 received calls with date/time information in
the Call List. The number will be shown on the LCD when the phone
is ringing. If the number matches with one of the entries in your
Private Phonebook, the caller’s name stored in the private phonebook
will be displayed alternatively with the number. The handset will ring
with the melody associated with that phonebook entry.
If the caller number is disabled to send caller information,
“
WItHHeLD
” will display. If the caller number is not provided, “
oUt
oF AReA
” will display. In standby, if three unanswered calls are
received, “
3 NeW CALLs
” will be displayed.
6. CALLER DISPLAY (NETWORK DEPENDENT)
6.1 View the Call List
6.2 Call from the Call List
All received calls are saved in Call List with the latest call putting
at the top of the list. When the call list is full, the oldest call will
be replaced by a new call. The unanswered call which has not
been read is marked with a at the centre of the bottom line of
the display.
Press to access the call list.
OR
Press
and / to select
CALL LIST
.
Press / to select the desired entry.
Press
to view the caller’s number if applicable.
1.
2.
3.
Press to access the call list.
OR
Press
and / to select
CALL LIST
.
Press
or
to dial out to the selected phonebook entry.
1.
2.
7. PHONE SETTINGS
7.1 Set the Ringer Melody for Internal/External Calls
7.2 Set the Ringer Volume
7.3 Adjust Earpiece and Handsfree Volume
7.4 Store Direct Memory Access Number
8. REGISTRATION
9. TECHNICAL SPECIFICATIONS
10. TROUBLESHOOTING
Press
and / to selec
t HS SETTINGS
.
Press
and / to select
RING SETUP
.
Press
and / to select
INT RING
or
EXT RING
.
Press
and / to select the desired ringer melody from the
melody list.
Press
to confirm.
Note:
The respective ringer melody will be played while browsing the
melody list.
1.
2.
3.
4.
5.
Press
and / to select
HS SETTINGS
.
Press
and / to select
RING SETUP
.
Press
and / to select
RING VOLUME
.
Press
and / to select the desired ringer volume (a total of 6
ringer volume levels including
VOLUME OFF
).
Press
to confirm.
Note:
The respective ringer volume will be played during your selection. If
VOLUME OFF
is selected, icon will display.
1.
2.
3.
4.
5.
There are 5 levels (
VOLUME 1
to
VOLUME 5
) to choose from for
each of earpiece and handsfree volume.
During a call:
Press / to select volume 1-5. The current setting is shown. When
you end the call, the setting will remain at the last selected level.
You can store three direct access numbers into digit KEY 1, KEY 2
and KEY 3, which will be convenient for you to dial to these
numbers directly.
Press
and / to selec
t HS SETTINGS
.
Press
and / to select
DIRECT MEM
.
Press
and / to select any one from
KEY 1
,
KEY 2
and
KEY 3
.
Press
and then enter the number you would like to store, or edit the
number existed before.
Press
to confirm.
Note:
Press and hold
, , or
to call the stored number.
1.
2.
3.
4.
5.
Your handset and base station is pre-registered. Up to five handsets
can be registered to a single base station.If for some reason, the
handset is not registered to the base station (
flashes even when
the handset is near the base station), register your handset according
to the following procedure.
Press and hold
on the base station for about five seconds, the base
station is entered into registration mode.
Press
and / to select
REGISTRATION
.
Press
and you are requested to enter the 4-digit system PIN
(default PIN is 0000).
Enter the 4-digit system PIN.
Press
to confirm.
1.
2.
3.
4.
5.
If the handset registration is successful, you will hear a
confirmation tone and the will stop flashing. The handset will
automatically be allocated the next available handset number. This
handset number is shown in the handset display in standby mode.
If the handset registration is unsuccessful, the
will still flash.
Free Field Range
Up to 300 metres*
Indoor Range
Up to 50 metres*
Handset Battery Life
(average values)
10 hours talk time**
100 hours standby**
Number of Handsets
Up to 5
Electrical Connection/
Base Mains Adaptor/
Charger
Base main adaptor:
Model No.:
VT04EUK06045
Input: 100-240 V/50-60 Hz/0.15 A
Output: 6 V DC/450 mA
Charger adaptor:
VT04EUK06045
Input: 100-240 V/50-60 Hz/0.15 A
Output: 6 V DC/450 mA
Only use the adaptors supplied with
the telephone
Batteries
Corun - Ni-MHAAAJ400 - 1.5V 400mAh
x 2 Ni-MH battery
GPI - VT40AAAHC - 1.5V 400mAh x 2
Ni-MH battery
Only use the batteries supplied with the
telephone.
Use any other type of battery presents a
risk of explosion.
Used batteries must be disposed of in
compliance with current environmental
protection regulations.
Operating Temperature
From 5°C to 40°C
* Values may vary according to environment.
** Depending on initial battery charge.
If you have difficulty with your phone, please try the suggestions
listed below.
As a general rule, if a problem occurs, remove the batteries from
all the handsets in your installation for about 1 minute, then
disconnect and reconnect the power supply to the base and
reinstall the handset batteries.
Problem
Cause
Solutions
No dialing
tone when
pressing
key
a. The connection cord
of the base station
is not plugged in.
b. The adapter cord
is not plugged in
correctly in the
base station.
c. The line is busy,
as another handset
is used.
d. Wrong connection
cord.
a. Check the connections.
Unplug and plug back
in the mains. Check
that the telephone line
cord has been plugged
into the base station
and the phone socket.
b. Check the base station
plug and the 220V plug
(remove and plug-in).
c. Wait until the line
is unoccupied.
d. Use the original
connection cord.
“
OUT OF
RANGE
” is
displayed.
a. Base station out
of range.
b. Base station not
connected to mains.
a. Reduce the range.
b. Connect base station
to mains.
The call does
not work.
Service not activated
or wrong operator.
Check your subscription
with network.
No display.
Empty battery.
Recharge battery.
Please contact the technical support of the network provider for
further information. This telephone is not equipped with a grounding
function! Therefore some of the functions may be limited when used
in PBX systems.
Technical Support
For technical support, please call VTech Technical Inquiry Hotline
852-2667 7433. Please read out the serial number of this telephone
to Technical Center. The serial number can be found in the battery
compartment after having the batteries removed.
Take care of your telephone
Your cordless telephone contains sophisticated electronic parts,
so you must treat it with care.
Avoid rough treatment.
Place the handset down gently.
Save the original packing materials to protect your telephone if
you ever need to ship it.
Avoid water
You can damage your telephone if it gets wet. Do not use the
handset in the rain, or handle it with the wet hands. Do not install
the telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges harmful to
electronic equipment. For your own safety, take caution when
using electric appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that should retain
its luster for many year. Clean it only with a soft cloth slightly
dampened with water or a mild soap.
Do not use excess water or cleaning solvents of any kind.
Note
Remember that electrical appliances can cause serious injury if
used when you are wet or standing in water. If the telephone base
should fall into water. DO NOT RETRIEVE IT UNTIL YOU UNPLUG
THE POWER CORD AND TELEPHONE LINE CORDS FROM THE
WALL. Then pull the unit out by the unplugged cords.
CAUTION
DISCONNECT ALL TELEPHONE LINE FROM THE
WALL-OUTLET BEFORE REPLACING BATTERY.
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
•
•
•
•
•
•
•
•
12. CARE AND MAINTENANCE INSTRUCTIONS
11. IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock
and injury, including the following:
Read and understand all the instructions.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not use this product near water (for example, near a bath
tub, kitchen sink, swimming pool).
Do not expose the telephone to direct sunlight or extreme cold
environment. Do not put the telephone close to heating sources
such as radiators, cookers, etc.
Do not overload wall outlets and extension cords as this can
result in the risk of fire or electric shock.
Unplug this product from the wall outlet and refer servicing to
VTech under the following conditions:
When the power supply cord or plug is damaged or frayed.
If the product does not operate normally by following the
operating instructions.
If the product has been dropped and the cabinet has
been damaged.
If the product exhibits a distinct change in performance.
1.
2.
3.
4.
5.
6.
7.
•
•
•
•
Avoid using a telephone (other than a cordless type) during an
electrical storm. There may be a remote risk of electric shock
from lightning.
Do not use the telephone to report a gas leak in the vicinity of
the leak.
Use only the supplied NiMH (Nickel Metal Hydride) batteries!
The operation periods for the handsets are only applicable with
the default battery capacities.
The use of other battery types or non-rechargeable batteries/
primary cells can be dangerous. These may cause interference
and/or unit damages. The manufacturer will not be held liable for
damage arising from such non-compliance.
Do not use third party charging bays. The batteries may be
damaged.
Please note the correct polarity while inserting the batteries.
Do not immerse batteries in water, do not place in fire.
DISPOSAL WARNING
When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
All electrical and electronic products/battery should
be disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
The correct disposal of your old appliance/battery will help
prevent potential negative consequences for the environment
and human health.
For more detailed information about disposal of your old appliance/
battery, please contact your city office, waste disposal service or The
Shop where you purchased the product.
If you have questions about this product, or having difficulty with
setup or operation, call or Customer Service Centre.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433
8.
9.
10.
11.
12.
13.
14.
1.
2.
3.
Customer Service Centre
Suite 1601, Lever Tech Centre, 69-71 King Yip Street,
Kwun Tong, Kowloon, Hong Kong.
Customer Service Hotline: (852) 2666 5558
Technical Inquiry Hotline: (852) 2667 7433
VTECH TELECOMMUNICATIONS LTD.
A member of THE VTECH GROUP OF COMPANIES
.
© 2013 VTech Telecommunications Ltd. All Rights Reserved.