17
California Energy Commission (CEC) battery charging
testing instructions
This telephone is set up to comply with the energy-conserving standards right
out of the box. These instructions are intended for CEC compliance testing
only. When the CEC battery charging testing mode is activated, all telephone
functions, except battery charging, will be disabled. These instructions assume
that all devices have been registered to the base station before activating this
test mode.
To activate CEC battery charging testing mode:
1. Remove the conference phone from the charging dock.
2. Remove the battery from the conference phone.
3. Press and hold
MUTE
on the conference phone.
4. With the
MUTE
key pressed, insert the battery in the conference phone, and
then wait for 5 seconds.
5.
When the conference phone status indicators start flashing red, release
MUTE
, and then press
MUTE
immediately. The conference phone displays
the mess-age: “To use the phone again, please reset the power.”
6. Put the conference phone on the charging dock to charge the conference
phone battery. The battery icon
indicates the charge status as the
battery charges.
To deactivate CEC battery charging testing mode:
1. Remove the conference phone from the charging dock.
2. Remove the battery from the conference phone.
3. Reinsert the battery in the conference phone without pressing any keys.
