88
Answering system settings
Message alert tone
When the answering system is turned on, the telephone
beeps every 10 seconds to alert you of new messages.
The tone stops when all new messages have been
reviewed. The message alert tone is preset to off.
To change the setting:
Press
MENU
on the handset when it is not in use.
Press or to highlight
Answering sys, then
press
SELECT
.
Press or to highlight
Ans sys setup, then
press
SELECT
.
Press or to highlight
Msg alert tone, then
press
SELECT
.
Press or to choose from
On or Off, then press
SET
to save. You hear a confirmation tone.
Recording time
You can set the recording time limit for each incoming
message. The default setting is three minutes.
To change the setting:
Press
MENU
on the handset when it is not in use.
Press or to highlight
Answering sys, then
press
SELECT
.
Press or to highlight
Ans sys setup, then
press
SELECT
.
Press or to highlight
Recording time, then
press
SELECT
.
Press or to choose from
3 minutes, 2 minutes,
or
1 minute, then press
SET
to save. You hear a
confirmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
You cannot set the message alert tone when another handset or the
telephone base is accessing the answering system.
ANS SYS SETUP
Call screening
# of rings
Remote code
Msg alert tone
BACK SELECT
MSG ALERT TONE
On
Off
BACK SET
ANS SYS SETUP
# of rings
Remote code
Msg alert tone
Recording time
BACK SELECT
RECORDING TIME
3 minutes
2 minutes
1 minute
BACK SET
