4
Getting started
Add and register a handset
You can add new handsets (
DS6301
, purchased separately) to your
telephone system, but each handset must be registered with the telephone
base before use. When first purchased, each expansion handset shows
Press and hold FIND HANDSET on base for 4 sec, then press # on
handset
after a battery is installed. You may need to charge the handset
before registering to the telephone base. For more details on battery
charging, see the table on page 3.
To register a handset:
Press and hold
/
FIND HANDSET
on the telephone base for about four
seconds until the red
IN USE
light turns on.
Press
#
(pound key) on the handset. Its screen shows
Registering...
Please wait
and it takes up to 60 seconds to complete the registration.
The handset shows
HANDSET X Registered
(
X
represents the handset
number assigned) and you hear a beep when the registration
is completed.
1.
2.
If the registration fails, the handset shows
Registration failed
for a few
seconds and then
Press and hold FIND HANDSET on base for 4 sec,
then press # on handset
. Try the registration process again.
You cannot register a handset if any other system handset is in use.
•
•
