Quick start guide
CS6328-2/CS6328-3/CS6328-4/
CS6328-5/CS6329/CS6329-2/
CS6329-3/CS6329-4/CS6329-5
Introduction
This quick start guide provides you with the basic installation
and use instructions. A limited set of features are described in
abbreviated form.
Please refer to the user’s manual for complete installation and
operation instructions.
Telephone base and charger installation
Install the telephone base and charger(s) as shown below.
Use only the power adapter(s) and battery(ies) supplied with
this product.
Telephone base
Telephone line cord
Telephone base
power adapter
Telephone
wall jack
If you have DSL
high speed Internet
service, a DSL filter
(not included) is
required.
Electrical outlet
not controlled by
a wall switch
Charger adapter
Charger
Battery installation and charging
Install the battery as shown below. Once you have installed the
battery, you may be able to make and receive short calls. For
best performance, charge the handset battery continuously for at
least 6 hours.
Charge light
remains on
when charging.
Plug the battery connector
securely into the socket.
2 Place the battery with the
wires inside the battery
compartment.
3 Slide the battery
compartment towards the
center of the handset until it
clicks into place.
4 Charge the handset in the
telephone base.
All manuals and user guides at all-guides.com
all-guides.com
