Telephone operations
Make a call
• Press
, and then dial the telephone number.
Answer a call
• Press
or any of the dialing keys.
End a call:
• Press
OFF
or put the handset back in the
telephone base or charger.
Volume
• During a call, press
VOL-
or
VOL+
to adjust
the listening volume.
Mute
The mute function allows you to hear the other party
but the other party cannot hear you.
1. During a call, press
MUTE
. The handset
displays
Muted
.
2. Press
MUTE
again to resume the
conversation. The handset displays
Microphone on
briefly.
Call waiting
When you subscribe to call waiting service from
your telephone service provider, you hear an alert
tone if there is an incoming call while you are
already on a call.
• Press
FLASH
to put the current call on hold
and take the new call.
• Press
FLASH
at any time to switch back and
forth between calls.
Find handset
Use this feature to find the system handset.
To start paging:
• Press
/FIND HANDSET
on the telephone
base when not in use. All idle handsets ring
and display
** Paging **
.
To end paging:
• Press
/FIND HANDSET
at the telephone
base.
-OR-
• Press
or any of the dialing keys on the
handset.
NOTE
• Do not press and hold
/FIND HANDSET
for
more than four seconds. It may lead to handset
deregistration.
Redial list
Each handset stores the last five telephone
numbers dialed. When there are already five
entries, the oldest entry is deleted to make room
for the new entry.
Review and dial a redial list entry
1. Press
REDIAL
when the handset is not in use.
2. Press
q
,
p
or
REDIAL
repeatedly until the
desired entry displays.
3. Press
to dial.
Delete a redial list entry
• When the desired redial entry displays, press
DELETE
.
Directory
The directory can store up to 30 entries, which are
shared by all handsets. Each entry may consist of
a telephone number up to 30 digits, and a name
up to 15 characters.
Add a directory entry
1. Enter the number when the phone is not in
use. Press
MENU
, then go to Step 3.
-OR-
Press
MENU
when the phone is not in use,
then press
SELECT
to choose
Directory
.
Press
SELECT
again to choose
Add contact
.
2. Use the dialing keys to enter the number.
-OR-
Copy a number from the redial list by pressing
REDIAL
and then press
q
,
p
or
REDIAL
repeatedly to select a number. Press
SELECT
to copy the number.
3. Press
SELECT
to move on to enter the name.
4. Use the dialing keys to enter the name.
Additional key presses show other characters
of that particular key.
5. Press
SELECT
to save.
While entering names and numbers, you can:
• Press
DELETE
to backspace and erase a digit
or character.
• Press and hold
DELETE
to erase the entire
entry.
• Press
q
or
p
to move the cursor to the left or
right.
• Press and hold
PAUSE
to insert a dialing
pause (for entering numbers only).
• Press 0 to add a space (for entering names
only).
Review a directory entry
Entries are sorted alphabetically.
1. Press when the phone is not in use.
2. Scroll to browse through the directory, or use the
dialing keys to start a name search.
Delete a directory entry
1. When the desired entry displays, press
DELETE
.
2. When the handset displays
Delete contact?
,
press
SELECT
.
Edit a directory entry
1. When the desired entry displays, press
SELECT
.
2. Use the dialing keys to edit the number, then
press
SELECT
.
3. Use the dialing keys to edit the name, then
press
SELECT
.
Dial a directory entry
• When the desired entry appears, press
to
dial.
Caller ID
If you subscribe to caller ID service, information
about each caller appears after the first or
second ring. If you answer a call before the caller
information appears on the screen, it will not be
saved in the caller ID log.
The caller ID log stores up to 30 entries. Each
entry has up to 24 digits for the phone number
and 15 characters for the name.
If the telephone number has more that 15
digits, only the last 15 digits appear. If the name
has more than 15 characters, only the first 15
characters are shown and saved in the caller ID
log.
Review a caller ID log entry
1. Press
CID
when the phone is not in use.
2. Scroll to browse through the caller ID log.
Missed call indicator
When there are calls that have not been reviewed
in the caller ID log, the handset displays
XX missed calls
.
Each time you review a caller ID log entry marked
NEW
, the number of missed calls decreases by
one.
When you have reviewed all the missed calls, the
missed call indicator no longer displays.
If you do not want to review the missed calls
one by one, press and hold
CANCEL
on the idle
handset to erase the missed call indicator. All the
entries are then considered old.
Dial a caller ID log entry
• When the desired entry appears, press
to
dial.
Save a caller ID log entry to the directory
1. When the desired caller ID log entry displays,
press
SELECT
.
2. Use the dialing keys to modify the number, if
necessary. Then press
SELECT
.
3. Use the dialing keys to modify the name, if
necessary. Then press
SELECT
.
Delete the caller ID log entries
• When the desired caller ID log entry displays,
press
DELETE
.
To delete all caller ID log entries:
1. Press
MENU
when the phone is not in use.
2. Scroll to
Caller ID log
and then press
SELECT
.
3. Scroll to
Del all calls
then press
SELECT
twice.
Sound settings
Key tone
You can turn the key tone on or off.
1. Press
MENU
when the handset is not in use.
2. Scroll to
Settings
and then press
SELECT
.
3. Scroll to choose
Key tone
, then press
SELECT
.
4. Press
q
or
p
to choose
On
or
Off
, then press
SELECT
to save.
Ringer tone
You can choose from different ringer tones for
each handset.
1. Press
MENU
when the handset is not in use.
2. Scroll to
Ringers
and then press
SELECT
.
3. Scroll to choose
Ringer tone
, then press
SELECT
.
4. Press
q
or
p
to sample each ringer tone, then
press
SELECT
to save.
NOTE
• If you turn off the ringer volume, you will not hear
ringer tone samples.
Ringer volume
You can adjust the ringer volume level, or turn the
ringer off.
1. Press
MENU
when the handset is not in use.
2. Scroll to
Ringers
and then press
SELECT
twice.
3. Press
q
or
p
to sample each volume level,
then press
SELECT
to save.
NOTE
• When the ringer volume is set to
Off
, the handset
still rings when you press
/FIND HANDSET
at the
telephone base.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer without
disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
• Press
CANCEL
or
MUTE
. The handset
displays
Ringer muted
.
Retrieve voicemail from telephone
service
Voicemail is a feature available from most
telephone service providers. It may be included
with your telephone service, or may be optional.
Fees may apply.
Retrieve voicemail
When you received a voicemail, the handset
displays and
New voicemail
. To retrieve,
you typically dial an access number provided by
your telephone service provider, and then enter
a security code. Contact your telephone service
provider for instructions on how to configure the
voicemail settings and listen to messages.
NOTE
• After you have listened to all new voicemail
messages, the indicators on the handset turn off
automatically.
Turn off the new voicemail indicators
If you have retrieved your voicemail while away
from home, and the handset still displays the new
voicemail indicators, use this feature to turn off
the indicators.
NOTE
• This feature turns off the indicators only, it does not
delete your voicemail messages.
1. Press
MENU
when the phone is not in use.
2. Scroll to
Settings
and then press
SELECT
.
3. Scroll to
Clr voicemail
and then press
SELECT
.
4. Press
SELECT
again to confirm.
Register a handset
When your handset is deregistered from the
telephone base, follow the steps below to register
it back to the telephone base.
1. Remove the handset from the telephone base.
2. Press and hold
/FIND HANDSET
at the
telephone base for about four seconds until
the
IN USE
light turns on.
3. Then press
#
on the handset. It displays
Registering...
The handset show
Registered
and you hear a
beep when the registration process completes.
The registration process takes about 60 seconds
to complete.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original
packing materials to protect your telephone if you
ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Frequently asked questions
Below are the questions most frequently asked
about the cordless telephone. If you cannot find
the answer to your question, visit our website at
www.vtechphones.com
or call
1 (800) 595-
9511
for customer service.
My telephone
does not work
at all.
Make sure the telephone
base is installed properly,
and battery is installed
and charged correctly. For
optimum daily performance,
return the handset to the
telephone base after use.
The display
shows
No line
.
I cannot hear the
dial tone.
Disconnect the telephone
line cord from your
telephone and connect it to
another telephone. If there
is no dial tone on that other
telephone either, then the
telephone line cord may be
defective. Try installing a
new telephone line cord.
If changing the telephone
line cord does not help,
the wall jack (or the wiring
to this wall jack) may be
defective. Contact your
telephone service provider.
You may be using a new
cable or VoIP service, the
existing telephone jacks in
your home may no longer
work. Contact your service
provider for solutions.
I accidentally
set my LCD
language to
Spanish or
French, and I
don’t know how
to change it back
to English.
While the handset is not
in use, press
MENU
and
then enter
364#
to change
the handset LCD language
back to English.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants
to the holder of a valid proof of purchase
(“Consumer” or “you”) that the Product and
all accessories provided in the sales package
(“Product”) are free from defects in material and
workmanship, pursuant to the following terms
and conditions, when installed and used normally
and in accordance with the Product operating
instructions. This limited warranty extends only to
the Consumer for Products purchased and used
in the United States of America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules, or
equipment. Repair or replacement of the Product,
at VTech’s option, is your exclusive remedy.
VTech will return the repaired or replacement
Products to you in working condition. You
should expect the repair or replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date
of purchase. If VTech repairs or replaces a
Materially Defective Product under the terms of
this limited warranty, this limited warranty also
applies to the repaired or replacement Product
for a period of either (a) 90 days from the date
the repaired or replacement Product is shipped to
you or (b) the time remaining on the original one-
year warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other
liquid intrusion;
2. Product that has been damaged due to repair,
alteration or modification by anyone other than
an authorized service representative of VTech;
3. Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna systems;
4. Product to the extent that the problem is caused
by use with non-VTech accessories;
5. Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible;
6. Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial or
institutional purposes (including but not limited
to Products used for rental purposes);
7. Product returned without a valid proof of
purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service in the U
SA, please
visit
our website at
www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.
vtechcanada.com or call
1 (800) 267-7377.
NOTE
: Before calling for service, please review
the user’s manual - a check of the Product’s
controls and features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery
or handling charges incurred in the transport of
the Product(s) to the service location. VTech
will return repaired or replaced Product under
this limited warranty. Transportation, delivery or
handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit.
If the Product failure is not covered by this limited
warranty, or proof of purchase does not meet the
terms of this limited warranty, VTech will notify you
and will request that you authorize the cost of repair
prior to any further repair activity. You must pay for
the cost of repair and return shipping costs for the
repair of Products that are not covered by this limited
warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
3. Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications
related to this Product. VTech provides no
other warranties for this Product. The warranty
exclusively describes all of VTech’s responsibilities
regarding the Product. There are no other
express warranties. No one is authorized to make
modifications to this limited warranty and you
should not rely on any such modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability
(an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the
date of purchase. Some states/provinces do not
allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to
you. In no event shall VTech be liable for any
indirect, special, incidental, consequential, or
similar damages (including, but not limited to lost
profits or revenue, inability to use the Product or
other associated equipment, the cost of substitute
equipment, and claims by third parties) resulting
from the use of this Product. Some states/
provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
Please retain your original sales receipt
as proof of purchase.
Technical specifications
Frequency
control
Crystal controlled PLL synthesizer
Transmit
frequency
1921.536-1928.448 MHz
Channels
5
Nominal
effective
range
Maximum power allowed by
FCC and IC. Actual operating
range may vary according to
environmental conditions at the
time of use.
Power
requirements
Handset: 2.4V Ni-MH battery
Telephone base: 6V DC @ 400mA
Charger: 6V DC @ 400mA
Memory
Directory:
30 memory locations;
up to 30 digits and 15 characters
Caller ID log:
30 memory locations;
up to 24 digits and 15 characters
VTech Communications, Inc.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings
Limited.
Specifications are subject to change without notice.
© 2016 VTech Communications, Inc.
All rights reserved. 03/17. CS6114-X_ACIB_V8.0
Document order number: 91-007041-080-100
Designed to fit your home.
And your life.
Handset control key panel:
CANCEL
