VTech CS5159-3, Руководство пользователя

Страница: 16 / 59

10
Check for dial tone
Press . If you hear a dial tone, the
installation is successful.
If you do not hear a dial tone:
Make sure the installation procedures
described above are properly done.
It may be a wiring problem. If you
have changed your telephone
service to digital service from a
cable company or a VoIP service
provider, the telephone line may need
to be rewired to allow all existing
telephone jacks to work. Contact your
cable/VoIP service provider for more
information.
Operating range
This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and
telephone base can communicate over
only a certain distance - which can
vary with the locations of the telephone
base and handset, the weather, and the
layout of your home or office.
When the handset is out of range, the
handset displays
Out of range or no pwr
at base
.
If there is a call while the handset is
out of range, it may not ring, or if it
does ring, the call may not connect well
when you press
. Move closer to the
telephone base, and then press
to answer the call. If the handset
moves out of range during a telephone
conversation, there may be interference.
To improve reception, move closer to the
telephone base.
•
•
Configure your telephone
Using the phone menu
Press MENU when the phone is not
in use.
Press
or until the screen displays
the desired feature menu.
Press
SELECT
to enter that menu.
To return to the previous menu, press
CANCEL on the phone.
To return to idle mode, press and hold
CANCEL
on the phone.
Set language
The LCD language is preset to English.
You can select English, French or
Spanish to be used in all screen displays.
Press MENU when the phone is not
in use.
Press
or to choose
Settings
,
and then press
SELECT
.
Press
SELECT
to choose
LCD
language
.
Press or to choose English ,
Français or Espa ñ ol , and then press
SELECT . Then the screen returns
to the previous menu. You hear a
confirmation tone.
NOTE
If you accidentally change the LCD language
to French or Spanish, you can reset it to
English easily by pressing MENU then
entering 364# .
1.
2.
3.
•
•
1.
2.
3.
4.