42
43
Appendix
Troubleshooting (continued)
The battery does not charge in the parent unit or the
parent unit battery does not accept charge.
Make sure the battery s nstalled n the parent unt battery
compartment correctly. The
lght on the parent unt should be on.
Completely remove and nstall the battery agan, then charge for up
to 3 hours.
If
lght on the parent unt s not on, refer to
The
light on the
parent unit is off
below.
If the
battery s completely depleted, t may take up to 30 mnutes to
charge the parent unt before t can be used for a very short tme
(page 9).
Purchase a new battery. Refer to
Parent unit battery installation
(page 6) and
Parent unit battery charging
(page 9).
The
light on the parent unit is off.
Make sure the parent unt battery s nstalled (page 6) and charged
(page 9) correctly.
Make sure the power adapter and the parent unt are plugged n
correctly and securely.
Unplug the parent unt power adapter. Wat for 15 seconds before
pluggng t back n. Allow up to one mnute for the baby unt and
parent unt to reset.
The link between the baby unit and the parent unit is
lost every now and then, and I’m experiencing sound
interruptions.
Move the parent unt closer to the baby unt (but not less than
1 metre). The parent unt may be out of range.
Reset the baby unt by unpluggng the electrcal power to the baby
unt. Wat for 15 seconds and plug t back n agan. Turn on the
baby unt and the parent unt. Allow up to one mnute for the parent
unt and the baby unt to synchronze.
•
•
•
•
•
•
•
•
•
•
