Connect and charge the baby monitor - BM3800N | BM3800N-2
The rechargeable battery in the parent unit is built-in.
Use only the power adapters supplied with this product.
Make sure the baby monitor is not connected to a switch-controlled electric outlet.
Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not
designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the table, or cabinet
outlets. Otherwise, the adapters may not properly connect to the outlets.
Make sure the parent unit, the baby units and the power adapter cords are out of reach of children.
The battery icon indicates the battery status (see the following table).
Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. When the parent
unit battery is fully charged, the battery icon becomes solid
.
It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time, turn the
parent unit off while charging.
The standby time varies depending on the sensitivity level you set, your actual use and the age of the battery.
5
