GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned
Off.
2. Find the battery cover located on the
top of the spine of the book. Use a
screwdriver to loosen the screw and
then open the battery cover.
3. Remove old batteries by pulling up
on the end of each battery.
4. Install 2 new AAA batteries following
the diagram inside the battery box.
(For
best performance, alkaline batteries
or fully charged Ni-MH rechargeable
batteries are recommended.)
5. Replace the battery cover and tighten
the screw to secure.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
5
Getting St
ar
ted
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
4
