6
Receive a call
When there is an incoming call, the telephone rings and the
MESSAGE WAITING
LED flashes.
To answer a call:
Lift the corded handset from the telephone base.
Place a call
Lift the corded handset. Listen for a dial tone and then dial the desired number, or press a Speed Dial key to dial a
programmed number.
End a call
Place the corded handset in the telephone base.
Share a call
During a call, parallel telephones (telephones on the same line) can join the call.
To join a call:
During a call, lift the corded handset to join.
Volume
Listening volume and ringer volume can be adjusted from the telephone base.
To adjust the listening volume:
During a call, press
+/VOLUME
or
-/VOLUME
to adjust the listening volume. The next call returns to the default listening volume.
To adjust the ringer volume:
At any time, slide the
RINGER VOL
switch on the right side of the telephone base to adjust the ringer volume.
Call waiting
When you hear a call waiting tone during a call, press
FLASH
on the telephone base to put your current call on hold and take
the new incoming call.
Press
FLASH
or the switch hook once rapidly at any time to switch back and forth between calls.
Mute
To mute the microphone:
During a call, press
MUTE
on the telephone base. The
MUTE
key illuminates when the mute function is turned on. You can hear
the party on the other end but they cannot hear you.
Press
MUTE
again to resume the conversation. The light on the
MUTE
key turns off.
.
2.
.
2.
Telephone operation
