background image

5

When using your telephone equipment,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions

marked on the product.

3. Unplug this product from the wall

outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.

4. Do not use this product near water

(for example, near a bath tub, kitchen
sink, or swimming pool).

5. Do not place this product on an

unstable cart, stand, or table. The
product may fall, causing serious
damage to the product.

6. Slots and openings in the cabinet and

the back or bottom are provided for
ventilation. To protect it from overheat-
ing, these openings must not be
blocked by placing the product on the
bed, sofa, rug, or other similar
surface. This product should never
be placed near or over a radiator or
heat register. This product should not
be placed in a built-in installation
where proper ventilation is not
provided.

7. This product should be operated only

from the type of power source
indicated on the marking label. If you
are not sure of the type of power
supply to your home, consult your
dealer or local power company.

8. Do not allow anything to rest on the

power cord. Do not locate this
product where the cord will be abused
by persons walking on it.

9. Never push objects of any kind into

this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric shock.
Never spill liquid of any kind on the
product.

10.To reduce the risk of electric shock,

do not disassemble this product. If
service or repair work is required,
contact VTech Customer Service at

1-800-595-9511 

in the U.S. and at

1-800-267-7377

 in Canada. Opening or

removing cabinet parts other than
specified access doors may expose
you to   dangerous voltages or other
risks.   Incorrect reassembling can
cause electric shock when the appli-
ance is subsequently used.

11.Do not overload wall outlets and

extension cords as this can result in the
risk of fire or electric shock.

12.Unplug this product from the wall

outlet :
A. When the power supply cord or

plug is damaged or frayed.

B. If liquid has been spilled into the

product.

C. If the product has been exposed

to rain or water.

D. If the product does not operate

normally by following the operat-
ing instructions. Adjust only those
controls that are covered by the
operating instructions because
improper adjustment of other
controls may result in damage and
will often require extensive work to
restore the product to normal
operation.

E. If the product has been dropped

and the cabinet has been
damaged.

F. If the product exhibits a distinct

change in performance.

13.Avoid using a telephone (other than

a cordless type) during an electrical
storm. There may be a remote risk of
electric shock from lighting.

14.Do not use the telephone to report a

gas leak in the vicinity of the leak.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Содержание 9151 - VT Cordless Phone













































Отзывы: