VTech 5-in-1 Stroll & Grow Trike, Руководство для родителей, Страница: 7 / 20

7 7
7
ASSEMBLY AND SETUP
1 . Align the front wheel ( I ) with the slot
on the frame (
A
). The pedal lock
should be on the right side of the
trike tyre.
A
I
T8
T8
2 . Place the cover ( T8 ) over the frame
(
A
) and screw them together with 4
T7 screws. Then, set aside.
Left T7 (x2) Right T7 (x2)
A
L
M
3
. Push down the back wheel cover
( M ) into the slot ( L ), until it snaps in.
Do this twice, once for each wheel.
4
. Push the right wheel (
L1
) and left
wheel ( L2 ) into the slots of ( C ).
They will lock in. (The right wheel
( L1 ) has a parking brake but the
left wheel does not).
C
L1
L2
Parking Brake
In case you need to remove a back wheel
after it’s been attached, use a flathead
screwdriver and push the lock inside the
slot (pictured below) to release the back
wheel.
T1 (x1) (for G & C)
T8 (x2) (for I & A) T9 (X2) for B
INCLUDED HARDWARE
REQUIRED TOOLS FOR
ASSEMBLY
(NOT INCLUDED)
T2 (x2) for D
T3 (x3) for B,C
T4 (x2) for J
T7 (x12) for F,N,K,T8
Slot
For additional assistance, watch our assembly video at: www.vtech.co.uk/tutorials/5in1trike .