23
Phone Book Directory
* When you finish entering the name, press
SELECT. The screen displays
ENTER NUMBER
.
* Enter the telephone number. Press
to backspace if you make a mistake.
Press
REDIAL/PAUSE to add a 2-second pause to the dialing sequence.
Multiple presses of the
REDIAL/PAUSE key will increase the pause in two
second increments;
- OR -
To Save the Last Number Dialed:
Instead of entering the telephone number, press
REDIAL/PAUSE to display the
last number dialed.
* Press
SELECT. If you are programming at the Base, your number has been
stored.
* If you are programming the cordless Handset, the screen will display:
DISTINCT RING ? N.
Use
or
key to choose Yes or No. Choosing
Yes will cause the cordless Handset to emit a different ring pattern if the number
you entered comes in via Caller ID (after the first ring).
* Press
SELECT to confirm your choice. A Phone Book entry with Distinctive Ring
selected will display a D in the upper right corner of the screen.
NOTE: When phone book memory is full, any attempt to enter a new name/number
will generate an error tone and
MEMORY FULL
on the display.
Edit a Number/Name Stored in the Directory
* Press
(
).
DIRECTORY
is displayed.
* Press
or
to scroll for the desired entry;
- OR -
* Press the key that has the first letter of the name on the desired record. Press the
key again to scroll through all records in the letter range of that key. For example
the 5JKL key will cycle through all entries beginning with J, K, L and 5 ).
* With the desired name displayed, press
SELECT. Press
or
until
EDIT
flashes.
* Press
SELECT.The cursor is now flashing at the end of the name. Use the
,
and dial keys to edit the name. Press
SELECT.
* Now edit the phone number. When done, press
SELECT. Now, make your
Distinctive Ring selection. Press
SELECT to save your edits.
Basic Operation
2498-manual-output.p65
3/6/03, 9:33 AM
23
