VTech 2428, Руководство пользователя

Страница: 12 / 31

This cordless phone can store 10 telephone numbers with names, each up to 16 digits
long in memory locations you assign (0-9).
Note: Press
OFF
at any time to exit memory dial mode.
Store a Number or Name in Memory
1 Press PROG/CHAN, then press until the screen displays
MEM DIAL MEM DIAL
MEM DIAL MEM DIAL
MEM DIAL
.
2 Press MEM. The screen displays
ENTER 0-9 ENTER 0-9
ENTER 0-9 ENTER 0-9 ENTER 0-9
.
3 Press the key (0-9) for the memory location where you’re storing this entry. If the
selected location is empty, the screen displays
ENTER NAME ENTER NAME ENTER NAME ENTER NAME ENTER NAME
.
Note: If the location is not empty, the current entry is displayed. Press
OFF
to exit
memory dial mode and start again, or follow the instructions to dial, edit or erase the
current entry.
4 Using the chart below, enter up to 15 characters for the name you’re storing
with the number. Use to backspace and make corrections; use to
advance and add a space.
Dial Key:
Presses
1 2 3 4 5 6
1
2
3
4
5
6
7
8
9
0
*
#
1
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
0
*
& , - . #
5 When you finish entering the name, press SELECT or PROG/CHAN. The screen
displays
ENTER NUMBER ENTER NUMBER
ENTER NUMBER ENTER NUMBER ENTER NUMBER
.
6 Enter the telephone number. Use to backspace and make a correction.
Press REDIAL/PAUSE to store a pause in the dialing sequence.
7 Press SELECT or PROG/CHAN to store your entry. The screen displays
DISTINCT RING? DISTINCT RING? DISTINCT RING? DISTINCT RING? DISTINCT RING?
and the current setting.
TELEPHONE MEMORY
9