4
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned
Off
.
2. Find the battery cover located on the bottom
of the unit, use a screwdriver to loosen the
screw and then open the battery cover.
3. Remove old batteries by pulling up on one
end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery box.
(For best performance, alkaline batteries
or fully charged Ni-MH rechargeable
batteries are recommended.)
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
