11
2. EQ Menu
EQ parameters can be set by pressing the
Cursor
push-button to advance from
EQ#
to
LEVEL
,
Freq
,
EQ BW
and finally to
EQ Type
. (Use the
Cursor
push-button to go backward from
EQ Type
to
EQ BW
,
EQ Freq
,
EQ
Level
then to
EQ#
). Use the Data wheel to change the parameter’s settings.
EQ#
– Selects one of the 8 available Equalizers.
TYPE
– The types of equalization can be set to parametric (
PEQ
), low-shelf (
LO-SHF
), high-shelf (
HI-SHF
),
and two all-pass options (
AP-1
and
AP-2
) .
All-pass EQ Types use slightly different options, instead of
using bandwidth (
BW
) and level (
LEVEL
) you can change the phase angle (
Deg
).
See description of different EQ TYPE options on next page!
EQ#:1
O1:______ EQ1
Cursor
Menu
TYPE:PEQ
O1:______ EQ1
TYPE:LO-SHF
O1:______ EQ1
Data
TYPE:HI-SHF
O1:______ EQ1
TYPE:AP-1
O1:______ EQ1
TYPE:AP-2
O1:______ EQ1
