1. P
ACKING
L
IST
√
VS NetCom Server
√
Power supply adapter, 220V to
9V 0.5A
for NetCom 111, 113 and 211
12V 1 A
for NetCom 411 and 413
12V 1 A
for NetCom 811 and 813
√
Serial Null Modem adapter for each port
√
CD-ROM with driver and configuration
software
√
Quick Installation Guide
Check if all parts are available. And also
carefully check, if the adapter has the correct
voltage (220V) and connector for your wall
outlets.
2. H
ARDWARE
C
ONFIGURATION
2.1. P
OWER
S
UPPLY
Connect the cable from the adapter to the
power jack at the rear side of NetCom. Place the
adapter into the wall outlet.
The red Power LED on NetCom will light.
2.2. E
THERNET
Connect the RJ45 on the rear side of NetCom to
your Switch or Hub. The yellow Link LED on
NetCom will light. When data traffic occurs on
the network, this LED will blink.
If you have a 100Mbit network the green Speed
LED on NetCom will light. If you have a
network with 10Mbit, the LED remains dark.
2.3. S
ERIAL
P
ORT
The serial port of NetCom allows for different
operations modes. These are defined by Dip
switches. The factory setting is RS232 (like
COM1). To change this operation mode, please
consult the table printed on the NetCom (top
side), or the User Manual on the CD-ROM.
3. D
RIVER
I
NSTALLATION
The driver setup is supervised by the Installation
Wizard. Before you start, contact your Network
Administrator. He will select correct values of
IP-address and Netmask for the NetCom.
Please have him check the values mentioned
below at the “Info Panel”.
The Installation Wizard will detect the NetCom
devices in your network. Later Windows will
find the serial ports via Plug & Play.
4.
THE
I
NSTALLATION
W
IZARD
Insert the CD-ROM into your
drive. It will start automatic,
presenting some information.
You have the choice to start the
installation. If the CD does not
start, or you do not want it to,
double-click the Icon of the
installation program. You’ll find it in
D:\Software, where “D” is the letter of your
CD-ROM drive.
After copying some files your network is
scanned for NetCom devices. This usually takes
about 30 seconds. Ensure network settings of
the NetCom are correct, by double-clicking each
devices icon.
4.1. I
NFO
-P
ANEL
For the Quick Installation it is most convenient
to use the DHCP option.
Installation
Wizard
Info Panel of NetCom Server
Содержание NetCom 111
Страница 1: ...VS NetCom Devices Quick Installation Guide...
